The brass appeared shiny and clean. I measured several to make sure they were properly trimmed. About 1/3 of the brass was quite short, below minimum spec. Several, about 6 cases were dangerously over maximum trim length. I ended up measuring the whole batch. Time wasted!
Excellent quality at an unbeatable price. I have loaded several thousand of these without a single issue or misfire. Highly recommended!
The brass appeared shiny and clean. I measured several to make sure they were properly trimmed. About 1/3 of the brass was quite short, below minimum spec. Several, about 6 cases were dangerously over maximum trim length. I ended up measuring the whole batch. Time wasted!
Excellent quality at an unbeatable price. I have loaded several thousand of these without a single issue or misfire. Highly recommended!
Haven''t loaded any but brass came quickly. Brass was nicely cleaned and polished and primers seated perfectly. Some cases had miner dents and scuffing
I like it this way very much. However they raised their price from $85 to $102 for the lot of 500. Logically, it makes sense. It costs me a $100 for 1000 primers and $30 go $40 for processed brass so if you buy 1000 pieces you will use one box of priers for $100 per 1000 shipped to my home. So this much better. Even the $102 prices isn't that bad but it was much better at $85. All of the pieces were done well, clean and ready to load on my Dillon 750. So it makes life easy and I am back on the range again.
$85.00 for 500 pieces with primers is a good value. I ran them through on a Dillon 750 in no time and this got me back on the range in no time wasted. If they have this again, I will purchase this again.
Cases spec out correct. A few dented cases, but still loadable.
I bought 1000, I got 1022. The brass is cleaned, polished, sized and trimmed. Good job
Excellent quality brass, processed properly. Have loaded several thousand rounds with zero issues. Would highly recommend!
Capital Cartridge shipped it fast and it was clean nicely trimmed brass that was ready to load! Not a bad price either so you can't go wrong getting it.
I’ve placed a number of orders for this and haven’t had one problem. Biggest headache loading .223 is prepping the brass. This is a great way around that!
