Ginex spp
seat well, no duds
Brass Cup
seat well, no duds
Have loaded about 10,000 rounds of 9mm with these primers without any issues whatsoever. Never had a failure to fire AND great service from Capital Cartridge
seat well, no duds
Have loaded about 10,000 rounds of 9mm with these primers without any issues whatsoever. Never had a failure to fire AND great service from Capital Cartridge
they shoot fine a little harder to set just have to take your time.
Great price, fast shipping. This is my 3rd case of GINEX SPP. They seat a little harder, but they all fire.
Given the shortage and high expense of primers I stopped reloading for almost two years. I have to admit I was very skeptical about these primers, but so far they have all gone off and not one dud. I seat these primers on my LNL press and they have loaded just as good as the Winchester primers I used prior. I’ve heard some comments that these primers don’t seat well so I did a comparison of ammo I reloaded using Winchester bs. Ginex primers. I have found these primers have seated up to .003 of an inch below flush and up to flush. The exact same measurements on my Winchester primers. So for 6 cents apiece it’s the best buy that I can find. I’ve also had good primer imprints my primers . I can totally recommend these primers and I will order more.
As far as quality and reliability go. These primers work fine never had one fail in over 5,000. Also it should be noted it takes a tad more oomph to insert them. Otherwise theses are great cheap primers. I wouldn’t necessarily trust them in a match. However I don’t see why they would be a problem to be honest.
they shipped the product very fast they are on top of everything very happy with this company
My first order was lost care of UPS, and Capital credited my card immediately. Nine days later the primers showed up, so I called them and had them re-charge me for them. Great response, fast phone calling. I ordered another case a few weeks ago, and they were shipped out immediately, and I got them a few days later. UPS was a day later than scheduled for delivery, but that is not the fault of Capital. Now for the important part. The primers are highly polished brass, much like the nickel CCI and Federal primers are, so they are easy to pick up in a tube for the progressive loading press. I have loaded and shot a couple thousand without a single issue. They are maybe a thousandth of an inch larger diameter than the domestic primers, but they feed fine, just tighter. Crimped nato brass may need to be swaged to spec, but most standard brass works fine as is. If you have brass that has a primer pocket that is a bit loose from loading it more than a few times, these primers are perfect. I would think the cup hardness is similar to Federal.
This is legit I purchased them and they arrived a day earlier and I'll definitely order them again.
Great primers fit well